The Process of Broken Bolt Removal

Author: reikopena | Posted: 21.02.2012

The major reason behind the breaking of bolt is the filth in the thread. When you put some pressure of the bolts then they break due to the dirt. It is required to clean them up with a wire brush in order to avoid such problems. If the bolt is broken then there is an urgent need for the broken bolt removal. For that purpose, you need to follow the systematic procedure. In order to remover, broken bolt there is requirement of some equipment which is perfectly designed for this purpose. For example screw extractor; this is the smallest metal tool to help the users in removing the broken heads of the bolts.

In addition to the abovementioned item, there is need for a systematic method and tools to be used for getting rid of the problem of broken bolts, which may cause various problems for you in future..

Now what you have got to do is follow the step by step process for broken bolt removal which is expressed here; first of all infuse the hole with wd40, now use the even headed screwdriver to the centre of the broken bolt. Now there is a need to hit it with the hammer for some time. Now use the shop rag to engross wd40. Here flashlight will be used for the purpose of checking the position of the bolt inside the hole. Once you come to know that where is the broken head is placed, use the special tool to pluck it our immediately.

The use of screw extractor is recommended for error free and trouble free broken bolt removal. Thus by following some simple steps in the right and adequate manner, you can get rid of the bigger problems that the broken thread of a bolt may cause.

Article was printed from http://www.articleside.com/business-articles/the-process-of-broken-bolt-removal.htm
Click here to return original format