A Simple Guide to Setting Up Attractive Mosaic Tiles

The majority of these tiles can be seen on the walls and floors of big Roman houses. With the passing of time, new tile colors, shapes, and styles have evolved, but the art of tile installation has stayed the same.

Mosaic tiles are fairly new compared to floor tiles. As opposed to common floor tiles, mosaic tiles are generally set up on kitchen counters and bathroom walls. If you’re planning to install mosaic tiles on your own, you should understand that there's a distinction between mosaic tile installation and regular tile installation. Mosaic tiles are not installed by piece due to their size.

If you do this, the tiles can go down or be misplaced while you’re waiting for the glue to dry. Here are the right procedures in fitting mosaic tiles.

Prepare. Before you set a single mosaic tile, you must first attach the little tiles to a lightweight sheet of mosaic tile mesh to ensure that you can glue the mosaics onto a wall or surface in a single sheet or cluster. This will allow you to work on the detail of the design ahead of time. Or else, it'll be extremely hard or totally impossible if you stick the tiles gradually. Next, prepare a batch of thinset mortar. This mortar will serve as the glue that will affix the mosaic tiles to the surface or wall.

Mount. Once you've wiped clean the surface or wall, utilize the thinset mortar and spread it evenly using a trowel. Preferably, the mortar thickness really should match the thickness of your tiles. After this, push the mesh mosaic sheet of tiles towards the mortar using the palm of your hand, using steady pressure on the whole sheet. Many individuals have a tendency to use rubber mallets to hammer the tiles in place, but there’s a large possibility that the force could dislodge some tiles and make the surface uneven. As soon as you've pressed all of the tiles in position, allow the mortar to set overnight. It's a good thing to leave the sheet in place as you wait for the mortar to set.

Finish. When the required time for setting has elapsed, you can then freely remove the mosaic mesh. Make sure to remove any glues left on the tile surface. Later on, apply grout to the spaces between the tiles and allow it to dry for around twenty to thirty minutes to achieve pleasing results.

Alana Geikie - About Author:
For more details, please search " mosaic tile mesh, mesh mosaic, and mosaic mesh " in Google.

Article Source:
http://www.articleside.com/home-improvement-articles/a-simple-guide-to-setting-up-attractive-mosaic-tiles.htm

Related Home Improvement Articles

Related Home Improvement Topics

electric gate dry air hardwood inlay relaxing hammock chair yogibo fly swing chair engineered sous vide